How to Replace a Kia Sportage Replacement Key
For a number of Kia models, the key contains the keyless entry system that is built into the key. This key typically resembles an remote control, and can be exchanged with a brand new one from a Kia dealer or locksmith.
Key fobs can fail to function due to a number of reasons, including batteries that are dead, worn-out buttons signals, signal interference or water damage. Here are some guidelines on how you can get your Kia Sportage replacement key to work again.
How do you replace a remote key or smartkey
If your Kia comes with an intelligent key, remote key push to start key, or a regular non-transponder metal key the battery in these keys will eventually need replacing. This is especially when the car displays a message telling that the smart or remote key has a low battery.
It's a fairly simple process. To replace the keyfob battery, remove your mechanical key from the slit that is located at the back of the fob. Then, you need to pry the cover off. Inside the key fob, there will be tiny screws that hold the battery in the correct position. Utilizing a small screwdriver unscrew the screw and pull out the old battery. Then, insert the new and close the slit inside the key fob.
Once the key fob has a fresh battery Test it by pressing the lock and unlock buttons. You're in good shape if the doors lock and unlock as you expect. You can now make use of your Kia's hands-free lock/unlock feature when your fingers are cold or you need to make errands in Brandon.
Note: Certain key fobs (transponder chip or smart keys) may require their programming done. This requires a programing machine that is available only to the locksmith who works for the automotive dealer. Other keys (non transponder keys made of steel), do not need programming. If your keys need to be programmed, you will need to be aware of the number written on the tag of the key code and keep it in a secure location.
How do I replace the battery?
If the Kia key fob doesn't respond to pressing the lock or unlock button, it's likely that the battery is not fully charged. A battery that is not functioning properly can cause other issues, like the check engine light appearing or the engine not working correctly. It is relatively easy to replace key fob batteries by using only the use of a few tools.
Make sure to shut off your vehicle and shut the doors before you begin. Find the small, metal or plastic piece at the bottom of the key fob. Press it until the metal key falls out. You can then put the key into the door handle of the driver to open your car.
To replace the battery on the key fob, take off the cover at the rear. Make use of a plastic pry tool to loosen up the latch that holds the black negative cable. Remove the old battery and then place the new battery to ensure its "+" side faces you and the "-", negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into place and avoid excessive force to avoid damaging or bending the contacts of the metal.
After you have installed the new battery after which you turn the key fob on and off in the ignition until the door locks cycle. Then, test your Kia key fob to determine whether it's functioning properly again.
How can kia dealership key replacement replace the smart key?
Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The smart key is equipped with an embedded mechanical key blade while the standard key fob does not. Both types of key fobs have batteries that eventually will need to be replaced. Fortunately, this is an easy task that will take about two minutes.
Be sure to turn off your Kia and stand on a flat, well-lit surface before you begin. Also, remember that there are tiny pieces inside the fob that could fall out if you are not vigilant.
The small release button is located on the lower backside. It's either an oval or circular slot. You can open the key fob by pressing the button.
Once you have the key fob open and you are able to take off the old battery and replace it. The new battery should be a CR-2032, and can be bought online or from your local auto parts store. When you're done, the key fob should permit you to lock or unlock and start your vehicle even if it's not running.
How to replace the mechanical key
The Kia keyfob is a great convenience, allowing us to lock or unlock our car by simply pressing the button. But, as with all devices it may have issues from time to time. There are solutions to fix these problems and keep your key fobs functioning for the duration of.
A low or dead battery is among the most frequent problems. This could cause your device to stop working or work intermittently. If this is the case try replacing the battery with a new one.
If this does not solve the issue, try using the flathead screwdriver that is standard to wedge the plastic casing of the fob open. Be careful not to damage any internal components, or scratch the plastic. After the battery has been removed and replaced, you can replace it with a new one.
When the new battery is installed, close and unlock the doors using the mechanical key (every key fob in the kia has an emergency mechanical key that will fit into the slot). Test the key fob and make sure it is working correctly. Contact a dealer, or a locksmith to fix the issue in the event that the fob is not working. To avoid future lockouts, ensure that you have an emergency key that can be able to work with all trunk and door cylinders.